Free delivery for all orders!

Same day dispatch if ordered before 2pm.

Fast and reliable.

1" Cold Water Filtration In-Line Purify System Housing + Whole Filter Set

  • Availability: In stock
  • FREE postage to UK mainland
  • Shipping from United Kingdom
  • Dispatched within 24 hours
  • Brand: Aquafilter
  • Product Code: 899b


AQUAFILTER H10B series housings - 10"-type filter housings offer the versatility to meet all customer filtration needs. They are all dedicated for cold water on residencial and commercial applications. H10B series housings are compatible with a broad range of 2 1/2" x 10" type cartridges widely available on the market. Heads are equipped with a pressure relief valve (providing ability to release air pressure collected during cartridge replacement procedure).

  •  High quality; 
  •  NSF certified for structural integrity and material requirements; 
  •  WRAS certificate; 
  •  FDA CFR title 21 Compliance; 
  •  Factory tested; 
  •  Two O-rings for maximum leak proof protection; 
  •  Domestic and commercial use; 
  •  Equipped with filter bracket, wrench and cartridge; 
  •  Equipped with antibacterial and antimicrobial filter centralizing ring; 
  •  Ideal for POE or POU use; 
  •  Maintenance free - saves money, time and labor; 
  •  Easy to connect to cold water inlet; 
  •  Easy to install, no electricity, no drain required; 
  •  Full flow 1" ports; 
  •  Made in EU with high performance components. 

  •  Domestic istallations; 
  •  Pre-filtration systems; 
  •  Food industry; 
  •  Industry laboratories. 

Set include:
  •  10” filter housing; 
  •  Polypropylene filter cartridge (removes sediments such as sand, silt, rust and suspended solids); 
  •  Mounting bracket with screws; 
  •  Wrench; 
  •  Instruction; 
  •  Color box; 
  •  Antibacterial and antimicrobial filter cartridge centralizing ring. 

  •  Clear Housing (sump): poly(ethylene terephtalate) (PET); 
  •  Cap: polypropylene; 
  •  Inserts: brass; 
  •  Pressure relief valve: brass; 
  • O-ring: NBR; 
  •  Number of orings: 2; 
  •  Thread: 1" BSP; 
  •  Operating pressure: 6 bar (90 psi); 
  •  Minimum working temperature: 2C (35F); 
  •  Maximum working temperature: 45C (113F) (Tested and certified by WRAS for 23C only); 
  •  Dimensions without bracket (H x OD): 315 x 120 (mm); 
  •  Dimensions with bracket (H x W x L)1: 355 x 120 x 140 (mm).


Detailed Specification
Thread Size 1"

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good