Floor Mounted Electric Channel Radiator Heater 80mm Height 280cm Length
- 2-3 weeks delivery time
- Free Shipping
ND Plus channel radiator with a ventilator mounted in the floor, in a earlier prepared tub can be used as main or as an additional source of heating. It is ideal in a large room areas with high glazing or rooms that are used periodically. The heating element is a copper-aluminum heat exchanger, which quickly responds to any change in temperature. It is installed in a galvanized tub of sheet metal covered with black powder coating RAL 9005. ND Turbo channel radiators have a ventilator mounted to the tub next to the heat exchanger. The number of ventilators depends on the length of the exchanger. Set the radiator ND Plus is supplemented by two visible elements: decorative transversal platform and finishing slats. Decorative transversal platform and finishing slats are anodized aluminum in color "Champagne". Channel radiator will work with any type of boiler to a temperature of 100°C. It can be connected with any type of pipe by two 1/2" threaded sockets. The radiator set includes: Decorative transversal platform, finishing slats in color "champagne", steel tub, anchors, self-leveling bolts, air vents, mounting strut and ventilator. • Platform width: 300 mm; • Bottom width: 250 mm; • Height: 80mm; • Length: from 800 mm to 2800 mm; • Voltage: 230VAC; • Connectors thread size: 1/2"; • Ventilator increases the heat despite the small tub size; • Heat is distributed evenly in the given place; • Quiet ventilator; • High comfort; • High performance and durability caused by special design of the heat exchanger and thick aluminum; • Low thermal inertia; • More effective work for lower heating costs; • Decorative platform fits to any interior.
- Platform width: 300 mm; Bottom width: 250 mm; Height: 80mm;
- Length: 2800mm; Voltage: 230VAC; Connectors thread size: 1/2";
- Ventilator increases the heat despite the small tub size;
- Heat is distributed evenly in the given place;