Programmable control timers are designed for time functions execution in automatics and control systems. Weeks programmer controls the output relay in dependence of program settings (day, hour). The device is fitted with some additional functions, among...

The microwave PIR motion sensor is an active movement detector. The integrated motion sensor sends high frequency electromagnetic waves (5.8 GHz) and receives an echo. The sensor detects echo changes caused by even the slightest movement in the observed...

The NTC-03 temperature sensor is designed for temperature measurement in conjunction with Zamel temperature controllers. The measuring element is an NTC 10K thermistor. The probes can not be connected in parallel or in series. Specification: - Measuring...

The one mode time relay PCM-01/24V has a delayed switch on function (reversive) in automation and control systems. The relay is released by power supply voltage. It has a wide time adjustment range from 0,1 s to 10 days. Additional ON/OFF functions...

The LDM-10 device is used for graphic presentation of the one-phase voltage supply system level. Voltage value is shown by means of a diode line of 11 LED diodes. The range of measure is from 195 to 245 V AC. Specification: - Applicable in signaling...

The device is used to signal the presence of voltage in a three-phase supply system. It is realized by means of three LEDs (L1, L2, L3). There are four colours of the LED diode available (red, green, yellow and mixed). LKM-01 power supply indicator can...

The LKM-03 power supply indicator is designed for single-phase system voltage signalling. Voltage presence is being signalled by means of a high-brightness LED. Various LED colour versions are available (red, green, yellow). Specification: -...

The RTM-01 temperature regulator is designed for load control (e.g. heaters, floor heating systems) in dependence of ambient temperature, near NTC sensor. The device is capable of temperature regulating in the range of +5 - +40 deg C according to the...